Send a Command to a Device

Many pages offer the ability to send a command to one or more selected devices.

1. When available, click or Send Command.

2. Specify the Product Type and one or more assets from the Asset ID drop-down list.

3. Click Next and then follow the steps below depending on the product type.

   If GT 12xx:

   1. Click Send to send a Capture Cargo Image or click Schedule.

   If PT 6000 or RT 6000:

   1. Click Multi Action, Poll, Restart, Independent, FSMA, or Carrier.

   2. Specify the command to send, or when available, click View Schedules for the selected device, or click Schedule.

      If Multi Action:

      Parameter	Send Command Options
      Power	On, off, do not change
      Zone x Power Alert	On, off, do not change
      Operation Mode	Continuous, start / stop, do not change mode of operation
      Probe	Set return probe, set supply probe, do not change probe
      Set Point x	Temperature point x, do not change set point x
      AFAX	Close, open, CFM control, do not change AFAX
      Clear Alarms	Active alarm reset, active and inactive alarm reset, do not change clear alarms
      Pre-Trip Initiated Time	Initiates short pre-trip, do not change initiate pre-trip
      Defrost Initiate	Initiates defrost, do not change initiate defrost
      Intelliset Command	Do not execute Intelliset command, read all Intellisets, set Intelliset index
      Optiset Plus	Enable, do not change

      If Poll:

      Parameter	Send Command Options
      Poll Command	Request new GPS, do not change

      If Restart:

      Parameter	Send Command Options
      Restart	Hardware restart, safe unit restart, do not change

      If Independent:

      Parameter	Send Command Options
      Lock Command	Lock, unlock, do not change

      If FSMA:

      Parameter	Send Command Options
      Compartment x	Enable, disable
      Sensor	Ambient temperature, cmpt x - return temperature, cmpt x - supply / discharge temperature, alert disabled
      Temperature	Relative or absolute High and low threshold values
      Other Settings	Not reach warning time Not reach alert time In range time Out of range time
      Options	Use compartment off as reefer off Use door open as reefer off Enable repetitive alarms

      If Carrier:

      Parameter	Send Command Options
      Micro Software Upgrade	Select Software Version: <choose a file>
      Data Recorded Download	Data Range: all data, past week, past month Filter: data recorder, alarm recorder
      Settings Upload / Download	Direction: download settings from reefer, upload settings to reefer

   3. Click Send.

    

If you selected Schedule:

1. Type a unique Reference Name.

2. Specify the start and end dates for the command.

3. Specify a frequency for the command (daily, weekly, or monthly).

4. Click Submit.

5. Click Send.